How Would You Repair Your Sash Cords?

If you are living in an old building, then you can find some sash windows in your home and you need to maintain such windows at regular intervals to keep avoid damage and extend their life. The most common problems of sash windows are the damages to their cords and frame. You need to hire a contractor for sash cord repairs and if required, they will also replace the frames of your window.

How would you access a broken sash cord?

Sash cords are made of different materials, such as waxed and un-waxed hemp and synthetic fibres. Apart from that, they are available in different diameters and you need to choose the right one. Ensure you buy the sash cords with the same diameter as the old ones. You need to install the sash cord separately at the upper panels and lower panels. It is recommended that you hire a technician for sash cord repairs, since the process can be a bit tricky and any lapse can lead to loss of material and time.

1. Once you remove the sashes from your window frame, you need to mark them according to their weight. You cannot reinstall the lower sash at the upper panel, hence marks them to avoid confusion. If you install them wrongly, then you cannot move your sashes thereafter. After sash cord repairs, you need to reinstall your window sashes in their right position.

2. For sash window repairs, you need to remove the lower sash and replace the cord of your upper sash. If it is related to your lower sash cord, then you need to remove the lower sash first and then take out the upper sash.

3. Once you remove the sashes, you need to take out the beads from the frame. You can find these beads at the corners of your frames, and you need to remove these beads from their centre position. Do not remove the beads from the corners because you might end up damaging the window frame and cannot repair your sash window cords.

4. After removing the beads from the middle of your frames, the frame will easily come off. If you find your window sash cords in a proper condition, then you can tie a string around them near the pulley. Then pull out the new cord and install it inside the frame. Now, you can lift the lower sash and install it accordingly. Afterward, you can lift the upper sash and replace the cords in a similar way. You can use nails and screws to install the sashes.

5. You can use a chisel to prise off the pocket cover from the frame and use some screws and nails to reinstall them in the proper position. You can remove the old cords from the frames and install new cords accordingly.

Easiest ways to repair your sash window cords:

1. Remove the screws and beads with a screwdriver.

2. Remove the sash from the window frame.

3. Remove the screws holding the windows.

4. Now, you can take out the sash cords from your window frames.

5. You can use a cotton line down around the pulley.

6. Pull the cotton line and lift the weight of your sashes.

7. Remove the excess cotton with a knife.

8. Install new sash cords.

9. If needed, use a silicone spray to fix squeaks.

You can repair the window sash cords with your DIY tools, but your windows can get affected or damaged. You need to replace your windows if anything goes wrong. In this case, you can hire sash cord repairs and services, and they can install new cords in your sash windows quickly and effectively.